Due to our modular base, we are flexible in our design: Toilets can vary from compact to larger wheelchair-friendly toilets in different sizes. We can create units with urinals on the outside, units with multiple toilets, change of the position of the entrance and so on. By using an IFD building method it also allows us to easily reuse all parts of the unit.

Ergonomic
Buttons for single and multiple operations are ergonomically positioned in order to minimize effort and maximise efficiency.

For visually impaired people
We make the toilet units as recognizable as possible on the outside. Inside, the parts are sufficiently contrasted with the rear wall to also be detectable for less well-sighted.

For wheelchair users
Multiple brackets, accessibility under the sink, a long mirror and minimum height differences provide an ergonomic toilet visit for wheelchair users.

No touch
Proximity sensors control the functions of opening the door, flushing the toilet and washing of hands. Because these sensors do not need to be touched, this results in cleaner surfaces and cleaner hands.

Hands dried in 10 seconds
We use powerful hand dryers to ensure that the hands are completely dry in 10 seconds. Hands do not need to be rubbed, of which provides hygiene benefits.

Automatic door opening
Our units can be equipped with normal and sliding door that can be automatically opened, so that people can effortlessly enter the toilet.

Safety comes first. This also applies to our toilet units. We have developed various systems that ensure that the toilet units are safe to use.

Emergency buttons
Emergency buttons have been placed on three sides of the interior, which can be reached from any position. After using this button, the door of the unit will open and the lights on the outside will flash. A message is also sent directly to the management system so immediate action can be taken if needed.

Emergency power
In the event of a power failure, the toilet will switch to emergency power. This ensures that the user can complete their visit under any circumstance.

Safety sensors
Motion and other safety sensors in the toilet unit check whether people or items remain in the unit after use. If the system registers thing, the cleaning cycle will be adjusted accordingly or will not be carried out.

Legionella protection
By regularly pumping the systems around, it is ensured that the water does not come to a standstill, also in the case of prolonged closure.

KIWA quality mark
We have the certificate on water pipe safety aspects “dangerous appliances”.

4G connection
A constant 4G connection with the toilet units is maintained. Various reports and any malfunctions are received in real-time, meaning that these can be responded to adequately.

In the development of our systems we pay special attention to sustainability. Because of the used materials and our way of building, our toilets are very sustainable. Furthermore, because the units can be Industrially Flexibly Disassembled every component of the unit can be easily replaced or renewed. This ensures that the toilet unit continues to perform long term and does not lose its ‘looks’. This also means that the toilet units fit perfectly into a circular economy.

Sanitronics also has their own cleaning products produced under the name ‘Sani-sol’. We produce three fully biodegradable cleaning agents, ensuring that the maintenance of the unit is done in a sustainable manner. We are also proud to say that we are partners of the Smart for Sustainable Cities Programme (U4SSC). Of the United Nations, working on 9 of the 17 Sustainable Development Goals.

Want to know more about Stand-Alone Unit?
Download our brochure for more information. Leave your e-mail address and your download will start automatically.